Hydraulic Top Link Hydraulic Top Cylinder Tractor Top Link Cat. 1-1 with Locking Block 16 1/8-22 7/16” with 2 x Hose

Directly mounted on tractors, excavators and Class 1 and 2 equipment and is widely used in waste, recycling, construction, transportation, agriculture, material treatment and other industries.SpecificationsMaterial: SteelColor: BlackProcess: Polishing and WeldingSurface Treatment: PaintingPull Force: 2.3t/5070lbsThrust Force: 3.5t/7716lbsModel: 16 1/8-22 7/16''Stroke: 16cm/6.29inBore Diameter: 5/6.3cm(1.96/2.48in)Rod Diameter: 3cm/1.18inColor: BlackJoint Bearing Width: 5.3cm/2.08inJoint Bearing Thickness: 1.6cm/0.62inPin Diameter: 2cm/0.78inMax. Length: 57cm/22.44inMin. Length: 41cm/16inPort Size: M14*1.5Hydraulic Cylinder Work Pressure Max: 20MpaDouble Pilot Check Valve Port Size: G3/8Double Pilot Check Valve Press Max: 30MpaDouble Pilot Check Valve Flow Max: 12L/minHydraulic Oil Hose Length: 75cm/29.52inHydraulic Oil Hose Port Size: G3/8*19Packing Size: 47*10*10cm/18.5*3.94*3.94inGross Weight: 8.5kg/18.89lbsPackage Included1* Double-acting Hydraulic Cylinder2* Hoses2* Banjo Bolts4* Sealing Rings1* Wrench1* BracketNotes1. Always check the cleanliness of oil for pollution. Please do not weld on the tube2. Please note that the rod must be lubricated. At the same time, pay attention to protect the rod when cleaning.3. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.

• Parameters:Model: 16 1/8-22 7/16'', Stroke: 16cm/6.29in, Bore Diameter: 5/6.3cm(1.96/2.48in), Rod Diameter: 3cm/1.18in,Joint Bearing Width: 5.3cm/2.08in,Joint Bearing Thickness: 1.6cm/0.62in,Pin Diameter: 2cm/0.78in,Max. Length: 57cm/22.44in,Min. Length: 41cm/16in,Port Size: M14*1.5,Hydraulic Oil Hose Port Size: G3/8*19. Includes hose, banjo bolts, sealing rings, and a wrench, making it convenient for your use and installation
• Strong Hydraulic Power: The double-acting hydraulic cylinder can exert linear motion and force through the hydraulic system (maximum working pressure of 20Mpa), without the need for mechanical gear or lever to generate 5511lbs pull force and 7716lbs thrust force to achieve maximum performance even under heavy loads
• Two-Way Design: Equipped with a two-way check valve, which can complete retraction and extension. The valve allows free flow in one direction, and the pressure drop is relatively small. In the opposite direction, it is usually closed, and the valve can be opened only when there is pilot pressure from another oil circuit
• Premium Material: Its high-strength steel piston, precision threaded gland with wear ring, polished hard chrome plated rod, and high tensile welded steel base ends enable our hydraulic cylinder to be suitable for various heavy applications and can withstand extreme weather. It can be directly mounted on tractors, excavators and Class 1 and 2 equipment and is widely used in waste, recycling, construction, transportation, agriculture, material treatment and other industries
• Good Sealing: The piston adopts a high-quality five-component compact seal for excellent performance, and the rod adopts a standard U-cup polyurethane rod seal with inner O-ring, POM-C wear rings, and polyurethane wiper to ensure excellent sealing performance, which is helpful to solve the problems of oil evaporation, air leakage, and piston blockage